PRODUCT

AC Motor

□90mm 60W

Product Kinds

1Ph./3Ph. Motor
CONTINUOUS DUTY

Products List

■ PERFORMANCE DATA (DUTY : CONTINUOUS)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Rating Starting Condenser
Input
(W)
Current
(A)
Torque
(kgf·cm)
Speed
(rpm)
Torque
(kgf·cm)
(V) (㎌)
IH9PG60-10 60 1ø100 50 150 1.50 4.49 1300 2.80 250 10.0
60 140 1.50 3.65 1600 3.00
IH9PG60-11 1ø110 60 160 1.50 3.65 1600 4.00 250 10.0
IH9PG60-20 60 1ø200 50 150 0.73 4.49 1300 3.80 450 2.0
60 140 0.73 3.65 1600 3.80
IH9PG60-22 1ø220 60 160 0.73 3.65 1600 4.50 450 2.0
IH9PG60-1U 60 1ø115 60 160 1.50 3.77 1550 3.50 250 8.0
IH9PG60-2C 60 1ø220 50 120 0.61 4.49 1300 3.80 450 2.5
70 1ø240 50 140 0.61 5.24 1300 4.50
IH9PG60-32 60 3ø220 50 135 0.70 4.49 1300 17.00
60 135 0.70 3.65 1600 15.00
IH9PG60-33 60 3ø380 50 135 0.40 4.49 1300 17.00
60 135 0.40 3.65 1600 15.00
IH9PG60-34 60 3ø440 50 135 0.35 4.49 1300 17.00
60 135 0.35 3.65 1600 15.00
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다.
    STRAIGHT축의 모터를 희망하시면 Motor Type의 PG를 S로 바꾸어 주문하십시오.
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다
  • 삼상 380V~440V 모터에서는 인버터를 사용할 수 없습니다. 권선의 절연이 열화되어 모터가 파손될 수 있습니다.
  • For motor with straight shaft, please write S in place of PG in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to 
  • UL or CE regulation. 
  • ※ The inverter is not available on three phase 380V~440V motors. 
  • Insulation of windings may deteriorate and damage the motor

■ RATED TORQUE OF GEARED MOTOR

(unit : kg·cm)

Speed of Geared Motor rpm 500 300 200 120 100 60 50 30 20 15 10
Gear Ratio 50Hz 3 5 7.5 12.5 15 25 30 50 75 100 150
60Hz 3.6 6 9 15 18 30 36 60 90 120 180
IH9PG60 + 9H□GB 11 18 27 41 49 74 88 147 200 200 200
11 18 27 40 48 72 86 144 200 200 200
  • 그린상자표시한 감속비의 감속기는 출력축의 회전방향이 모터축의 회전방향과 반대로 됩니다.
  • 감속모터의 회전수(Speed of Geared Motor)는 모터의 회전수 (50Hz에서 1500rpm, 60Hz에서 1800rpm)를 기준하여 산출하였습니다.
    실사용시의 회전수는 부하의 크기에 따라 위의 표보다 2~15% 작게 됩니다.
  • 하얀상자부에는 감속비를 지정하여 주십시오. 감속기는 별도로 판매 됩니다.
  • The rotation of geared motor in green screen is reverse of motor rotation. 
  • Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will 
  • be 2 to 15 percent lower than above figure. 
  • When ordering gear head, please fill blank □ with gear ratio

■ MOTOR(STRAIGHT SHAFT)IH9S60WT 2.6kg

■ GEARED MOTORIH9PG60 + 9H□ GB    WT 2.6+1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GB M6×90

■ KEY SPEC

■ GEARED HEAD9H□ GBF     WT 1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GBF M6×25

■ KEY SPEC

■ DECIMAL GEAR HEAD9H10XG WT 0.6kg

■ WIRING DIAGRAM

   
  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.