PRODUCT

AC Motor

□60mm 6W

기본사양

OFF BRAKE TYPE
Tacho-Generator Type

제품목록

■ PERFORMANCE DATA (DUTY : 30 Min.)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Brake Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Input
(W)
Torque
(kgf·cm)
(V) (㎌)
RHKT6PF6-10 6 1ø100 50 90~1400 0.41 0.10 0.30 6 2.0 250 3.0
60 90~1700 0.41 0.10 0.30
RHKT6PF6-11 1ø110 60 90~1700 0.49 0.12 0.30 6 2.0 250 3.0
RHKT6PF6-20 6 1ø200 50 90~1400 0.41 0.10 0.15 6 2.0 450 0.8
60 90~1700 0.41 0.10 0.15
RHKT6PF6-22 1ø220 60 90~1700 0.49 0.12 0.15 6 2.0 450 0.8
RHKT6PF6-1U 6 1ø115 60 90~1700 0.49 0.12 0.23 6 2.0 250 2.5
RHKT6PF6-2C 6 1ø220 50 90~1400 0.49 0.12 0.14 6 2.0 450 0.8
7 1ø240 50 90~1400 0.57 0.14 0.14
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다.
    STRAIGHT축의 모터를 희망하시면 Motor Type의 PF를 S로 바꾸어 주문하십시오.
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다
  • 정격부하 보다 크거나 주위온도가 40℃이상의 조건에서는 온도상승이 급격히 되므로 연속사용이 불가능 합니다.
  • 회전방향을 바꿀 때에는 반드시 전원을 차단한 후 정지된 상태에서 재결선 하시기 바랍니다.
  • For motor with straight shaft, please write S in place of PF in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to 
  • UL or CE regulation. 
  • It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40
  • when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.

■ RATED TORQUE OF GEARED MOTOR

(unit : kg·cm)

Speed of Geared Motor rpm 500 300 200 120 100 60 50 30 20 15 10
Gear Ratio 50Hz 3 5 7.5 12.5 15 25 30 50 75 100 150
60Hz 3.6 6 9 15 18 30 36 60 90 120 180
RHKT6PF6 + 6H□FM 1.0 1.7 2.5 4.2 5.0 7.5 9.1 14 20 25 25
RHKT6PF6 + 6H□FB 1.2 2.0 3.0 5.0 6.5 9.1 10.9 16 24 25 25
  • 그린상자표시한 감속비의 감속기는 출력축의 회전방향이 모터축의 회전방향과 반대로 됩니다.
  • 감속모터의 회전수(Speed of Geared Motor)는 모터의 회전수 (50Hz에서 1500rpm, 60Hz에서 1800rpm)를 기준하여 산출하였습니다.
    실사용시의 회전수는 부하의 크기에 따라 위의 표보다 2~15% 작게 됩니다.
  • 하얀상자부에는 감속비를 지정하여 주십시오. 감속기는 별도로 판매 됩니다.
  • The rotation of geared motor in green screen is reverse of motor rotation. 
  • Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will 
  • be 2 to 15 percent lower than above figure. 
  • When ordering gear head, please fill blank □ with gear ratio

■ MOTOR(STRAIGHT SHAFT)RHKT6S6WT 1.3kg

■ GEARED MOTORRHKT6PF6 + 6H□ FM(6H□ FB)WT 1.3+0.3/0.4kg

■ BOLT SIZE

No L(mm) GEAR RATIO BOLT SIZE
01 30 1/3 ~ 1/18 M4×60
02 40 1/20 ~ 1/200 M4×70

■ KEY SPEC

  • NONE

■ WIRING DIAGRAM

  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.